Decades of Floor.
Days to Install.
Traditional ¾-inch solid hardwood, finished at the factory. Nailed down over a wood subfloor. No sanding or finishing in your home.
Access to leading manufacturers — species, grades, textures & finish options in this categoryOne solid board, finished before it arrives
Solid hardwood is exactly what it sounds like: one piece of real wood from top to bottom. With prefinished solid hardwood, each board is milled with tongue-and-groove edges, then sanded, stained, and sealed at the factory before it arrives at your home.
123
One piece of real hardwood, not a layered construction.
Because the plank is solid wood, it can usually be sanded and refinished multiple times over its life.
Because the finish is applied at the factory, there's no on-site stain or finish cure time.
Find your floor by look, not by spec sheet
Start with the look you want, then we'll help narrow the right species, grade, cut, and width. Species sets the grain and character; on a prefinished floor the color comes from the collection you choose — so you pick the grain, then choose the collection color and finish.
Imported and exotic species can offer dramatic color, hardness, and grain, but availability, sourcing, color change, and installation considerations vary widely. We'll help confirm whether a species makes sense for your project before recommending it.
Dent resistance, by species
A quick reference for how each species stands up to dents and daily wear.
Janka values are industry reference figures and vary by source and by individual board.
One board, three patterns
The same plank can be laid three ways — the pattern changes the entire character of the room.
Straight — the classic. Clean lines, timeless, and the most efficient use of material.
Herringbone — boards woven in a broken zigzag. Tailored, European, quietly formal.
Chevron — boards meeting at a point, driving the eye down the room in continuous arrows.
Where solid hardwood belongs
Above grade, nailed to a wood subfloor — bedrooms, hallways, and the main living levels. On concrete or below grade, engineered is the better real-wood choice.
Need real wood over concrete, radiant heat, or a finished lower level? See Engineered — Prefinished →
The right method for your subfloor
Nail-down, glue-down, or floating — it depends on what’s under the floor and the construction you choose. Our crews install all three.
Nail-Down
Pros
Rock-solid, permanent hold
The traditional feel underfoot
Cons
Needs a wood subfloor — nails can’t grip concrete
Glue-Down
Pros
Direct, stable bond — quiet underfoot
The standard over concrete
Cons
Slower installation; harder to replace later
Floating
Pros
Fast, clean installation
Forgiving of minor subfloor flaws
Cons
Softer sound underfoot; not for floors finished on site
| SUBFLOOR |  Waterproof & LVP |  Engineered |  SolidOn This Page |
|---|---|---|---|
| PlywoodAt or above ground | |||
| ConcreteAt ground level | * | ||
| Concrete basementBelow ground |
* Solid can sometimes be glued to a dry, tested slab at ground level — ask us. We usually recommend engineered there. Every floor is installed to its manufacturer’s specifications.
Prefer we call you?
Your name, a number and your town is all we need to get back to you. Call or text works too — whichever is easier.
Use the full form →Finished at the factory. Ready faster.
Each plank arrives sanded, stained, and sealed before installation. Many prefinished floors use durable UV-cured aluminum oxide coatings designed for everyday wear, giving you a cleaner installation with no sanding, staining, or finishing inside the home.
Walkable Sooner
No on-site stain or finish cure time, so the room can usually be used much faster.
No On-Site Sanding or Staining
The finish work happens at the factory, which means less disruption inside the home.
Durable Factory Finish
Many prefinished floors use UV-cured coatings designed for everyday wear.
Predictable Color & Sheen
Approved samples give you a clear sense of the color, texture, and sheen before installation.
The Micro-Bevel Edge
Most prefinished planks have a small micro-bevel at the edge of each board. It helps factory-finished boards meet cleanly during installation while creating a subtle line between planks. If you want the smoothest continuous surface, a site-finished floor may be the better fit.
Choose the Sheen That Fits the Room
With prefinished solid hardwood, sheen is chosen from the collection you select. Most current hardwood looks fall in the matte-to-satin range because lower sheen tends to look more natural and hide everyday wear better.
Prefinished floors arrive in ready-made collection colors. Most fall into these tone families — from light and blonde through grey and whitewashed — so you can start by picking the direction, then choose the exact collection.
Want a fully custom color or a seamless surface? See Solid — Site-Finished →
What you're paying for, level by level
With prefinished solid hardwood, price is driven by the wood itself and the finish applied to it. Grade, cut, width, length, texture, and finish quality all affect where a floor lands in the range. The constant is the construction: 3/4-inch solid hardwood at every level.
Grade & Character
Grade affects how clean, varied, knotty, or character-rich the finished floor appears.
Cut
How the boards are sawn from the log affects grain pattern, movement, and overall appearance.
Width & Length
Wider and longer boards create a calmer floor with fewer seams and a more architectural feel.
Finish Quality & Warranty
The finish system affects scratch resistance, sheen consistency, maintenance, and warranty coverage.
The Riftline Edge
Nail-Down Specialists
We help make sure solid hardwood is installed where it belongs, over the right subfloor, with the right preparation.
Statewide Reach
Based in Northern New Jersey, with a second hub in Ocean County — serving homeowners and contractors throughout the state.
Job-Site Fluent
Clean work, clear scheduling, and coordination with homeowners, designers, GCs, builders, and remodelers.
Residential & Commercial
From single rooms and renovations to larger homes, buildouts, and commercial spaces.
Already have solid hardwood that needs a refresh? Explore Sanding & Refinishing →
Let's find the right solid hardwood floor
Tell us where the floor is going, what subfloor you have, and the look you're after. We'll help compare the right prefinished solid hardwood options, bring samples, measure on site, and give you clear numbers.
Free In-Home Consultation
We review the space, check the subfloor, and help narrow the right options.
Request Samples
See color, grain, texture, and sheen in your own light.
Match My Floor
Send a photo of your room, cabinets, or existing flooring and we'll recommend close-fit options.
Get a Project Quote
Clear pricing based on the actual space, product, and installation method.